Security Bracket Installation Instructions
Read about security bracket kit (AH-ACC-SEC-KIT-80211AC) in this topic. Install the security bracket kit using this topic.
This guide explains how to install locking security brackets on ceiling- or wall-mounted Extreme Networks APs. This kit can be used with all Extreme Networks 802.11ac wave 2 products.
Kit Contents and Required Tools
The security bracket kit (AH-ACC-SEC-KIT-80211AC) contains the following items:
- (5) security screws
- (4) locking brackets
- Security screw driver bit
- Installation instructions
You will need a screwdriver socket that will accommodate the security screw bit.
Install the Security Bracket
The following illustrations show how to install the locking security bracket for both diagonal and square mounted devices. The illustrations below show how to secure square-mounted devices or diagonally-mounted devices on dropped ceiling tracks, walls, or drywall ceilings.
Install the locking security bracket on a square-mounted device
Install the locking security bracket on diagonally-mounted devices.
Copyright © Extreme Networks, Inc. 6480 Via Del Oro, San Jose CA, 95119 USA