AP150W Hardware User Guide

Read about and view specifications and compliance information for the AP150W in this topic. Install the AP150W using this topic.

The compact, lightweight Extreme Networks AP150W can be mounted directly into a wall plate, or on a stand on a desktop. The AP150W features two Wi-Fi radios; a fixed 5 GHz 3x3:3 802.11ac Wave 2 radio, and a fixed 2.4 GHz 2x2:2 802.11n radio. 3x3:3 SU-MIMO provides 1300 Mbps data rates and 2x2 MU-MIMO provides 192 Mbps data rates. Built-in BLE  provides proximity, indoor location tracking, and other location-based mobile engagement services.

The AP150W provides four wired Gigabit Ethernet ports. One of these ports provides PoE (Power over Ethernet) for applications such as VoIP phones or IP cameras. For wall outlets with more than one cable or connector, a passive pass-through port on the back of the device allows you to connect the AP150W without disabling the other cable or connector.

The AP150W has the power to support enterprise-grade features, including built-in application visibility and control, RADIUS authentication, DHCP, captive web portals, location services and spectrum analysis.

For more information about Extreme Networks APs in general, see "Introduction to Extreme APs".

For hardware compliance statements, see "Regulatory Compliance Statements".

Important! Change the Country Code

If your access point is configured for the World Regulatory Domain, it is important to set the country code to the country in which the AP will be deployed to meet regulatory requirements and for optimal wireless operation. To do this, follow these steps:

  • The country code selection is for World models only and is not available to FCC, CAN, and other country-specific models. Per FCC regulations, all Wi-Fi products marketed in the United States must be set to U.S. channels only.

Install the AP150W

The following sections describe how to install your AP150W devices, connect them to the network, and start managing them in ExtremeCloud IQ.

Hardware Components

You can see the hardware components of the AP150W in the illustration below and read about them in the sections that follow.

Component Descriptions

Hardware Specifications

The following specifications describe the physical features and hardware components, PoE electrical requirements, and the temperature and humidity ranges in which the devices can operate.

Regulatory Compliance Statements

The regulatory compliance statements in this section apply to Extreme NetworksAP150W devices.

 


Cloud Terms of ServiceEvaluation AgreementData Privacy and Protection

Copyright ©  Extreme Networks, Inc. 6480 Via Del Oro, San Jose CA, 95119 USA