AP245X Hardware User Guide

Read about and view specifications and compliance information for the AP245X in this topic. Install the AP245X using this topic.

The Extreme NetworksAP245X external-antenna AP features 802,11ac Wave 2 dual radio, 3x3:3 MU-MIMO with data rates up to 1.3 Gbps per radio using existing 802.3af PoE infrastructure. Built-in BLE  provides proximity, indoor location tracking, and other location-based mobile engagement services. The AP245X has the power to support enterprise-grade features, including built-in application visibility and control, RADIUS authentication, DHCP, captive web portals, location services and spectrum analysis.

For more information about Extreme Networks APs in general, see "Introduction to Extreme APs"

For information about connecting your AP to the network, best-practices, and troubleshooting, see "Basic Troubleshooting for New Devices".

For regulatory compliance information, see "Regulatory Compliance Statements".

Important! Change the Country Code

If your access point is configured for the World Regulatory Domain, it is important to set the country code to the country in which the AP will be deployed to meet regulatory requirements and for optimal wireless operation. To do this, follow these steps:

  • The country code selection is for World models only and is not available to FCC, CAN, and other country-specific models. Per FCC regulations, all Wi-Fi products marketed in the United States must be set to U.S. channels only.

Install the AP245X

The following sections describe how to install your Extreme Networks AP245X devices, connect them to the network, and start managing them in ExtremeCloud IQ.

Hardware Components

You can see the hardware components of the AP245X in the illustration below and read about them in the sections that follow.

  • To meet federal radiation exposure requirements, these devices should be installed at a minimum distance of 9.05" (23 cm) from your body.

Hardware Component Descriptions

Hardware Specifications

The following specifications describe the physical features and hardware components, PoE electrical requirements, and the temperature and humidity ranges in which the devices can operate.

Regulatory Compliance Statements

The regulatory compliance statements in this section apply to Extreme Networks AP245X devices.

 


Cloud Terms of ServiceEvaluation AgreementData Privacy and Protection

Copyright ©  Extreme Networks, Inc. 6480 Via Del Oro, San Jose CA, 95119 USA