AP250 Hardware User Guide

Read about and view specifications and compliance information for the AP250 in this topic. Install the AP250 using this topic.

The Extreme Networks AP250 features two Wi-Fi radios; a fixed 5 GHz 802.11ac Wave 2 radio and a software-selectable 802.11n 2.4 GHz/ 802.11ac 5 GHz radio. Software-selectable radio allows IT managers to enable 802.11ac performance on both radios for the best coverage and capacity, up to 2.6 Gbps. Built-in BLE  provides proximity, indoor location tracking, and other location-based mobile engagement services. The AP250 has the power to support enterprise-grade features, including built-in application visibility and control, RADIUS authentication, DHCP, captive web portals, location services and spectrum analysis.

For more information about Extreme Networks APs in general, see "Introduction to Extreme APs"

For information about connecting your AP to the network, best-practices, and troubleshooting, see "Basic Troubleshooting for New Devices".

For regulatory and compliance information, see "Regulatory Compliance Statements".

Important! Change the Country Code

If your access point is configured for the World Regulatory Domain, it is important to set the country code to the country in which the AP will be deployed to meet regulatory requirements and for optimal wireless operation. To do this, follow these steps:

  • The country code selection is for World models only and is not available to FCC, CAN, and other country-specific models. Per FCC regulations, all Wi-Fi products marketed in the United States must be set to U.S. channels only.

Install the AP250

The following sections describe how to install your Extreme Networks AP250 devices, connect them to the network, and start managing them in ExtremeCloud IQ.

Hardware Components

You can see the hardware components of the AP250 in the illustration below and read about them in the sections that follow.

Component Descriptions

Hardware Specifications

The following specifications describe the physical features and hardware components, PoE electrical requirements, and the temperature and humidity ranges in which the devices can operate.

Regulatory Compliance Statements

The regulatory compliance statements in this section apply to Extreme Networks AP250 devices.

 


Cloud Terms of ServiceEvaluation AgreementData Privacy and Protection

Copyright ©  Extreme Networks, Inc. 6480 Via Del Oro, San Jose CA, 95119 USA