AP410C Hardware User Guide

Read about and view specifications and compliance information for the AP410C in this topic. Install the AP410C using this topic.

The AP410C is a high-performance 802.11ax 5G dual band access point designed for indoor high-density environments. This device supports IEEE 802.11ax Orthogonal Frequency-Division Multiple Access (OFDMA) multi-user access.

For regulatory and compliance information, see "Regulatory Compliance Statements".

Safety Guidelines

Install the AP

You can mount the AP410C on a flat surface or wall, or on the rails of a standard dropped ceiling grid. There is also an accessory mounting bracket that allows you to install the device in Armstrong-style dropped ceilings (ordered separately).

The following sections describe how to install your AP410C devices.

Hardware Components

You can see the hardware components of the AP410C in the illustration below and read about them in the sections that follow.

Component Descriptions

Hardware Specifications

The following sections list radio, device, power, and environmental specifications for the AP410C.

Antenna Plots

The antenna plots for the AP410C are available below. The Ethernet port location is noted on each chart.

Power and Environmental Specifications

Regulatory Compliance Statements

The regulatory compliance statements in this section apply to Extreme Networks  devices.

USA, Canada, and Taiwan Radio Frequency Bands

a. USA

  • 802.11b/g/n/ac: 2.4 GHz band: 2400-2483 MHz
  • 802.11a/n/ac/ax: 5 GHz band: 5150-5250, 5725-5850 MHz
  • BLE: 2402-2480 MHz

b. Canada

  • 802.11b/g/n/ac: 2.4 GHz band: 2400-2483 MHz
  • 802.11a/n/ac/ax: 5 GHz band: 5150-5250, 5725-5850 MHz
  • BLE: 2402-2480 MHz

c. Taiwan

  • 802.11b/g/n/ac: 2.4 GHz band: 2412-2462 MHz
  • 802.11a/n/ac/ax: 5 GHz band: 5180-5320, 5500-5825 MHz
  • BLE: 2412-2462 MHz
  • Max TX Power
  • 2400-2483 - 28 dBm conducted
  • 5150-5250 - 22 dBm conducted
  • 5725-5850 - 22 dBm conducted

Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Brazil Statement

Este equipamento não tem direito à proteção contra inteferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.

Mexico Statement

La operación de este equipo está sujeta a las siguientes dos condiciones

(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y

(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.

The operation of this equipment is subject to the following two conditions:

(1) it is possible that this equipment or device does not cause disruptive interference and

(2) this equipment or device must accept any interference, including interference that may cause undesired operation).

European Waste Electrical and Electronic Equipment (WEEE) Notice

In accordance with Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment (WEEE):

  1. The symbol above indicates that separate collection of electrical and electronic equipment is required.
  2. When this product has reached the end of its serviceable life, it cannot be disposed of as unsorted municipal waste. It must be collected and treated separately.
  3. It has been determined by the European Parliament that there are potential negative effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment.
  4. It is the users’ responsibility to utilize the available collection system to ensure WEEE is properlytreated.

For information about the available collection system, please contact Extreme Environmental Compliance at Green@extremenetworks.com.

Hazardous Substances Statement and RoHS Chart

Hazardous Substances

This product complies with the requirements of Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.