AP550 Hardware User Guide

Read about and view specifications and compliance information for the AP550 in this topic. Install the AP550 using this topic.

The Extreme NetworksAP550 features 802,11ac Wave 2 dual 5 GHz radio, and 4x4:4/3 MU-MIMO . Built-in BLE  provides proximity, indoor location tracking, and other location-based mobile engagement services. The AP550 has the power to support enterprise-grade features, including built-in application visibility and control, RADIUS authentication, DHCP, captive web portals, location services and spectrum analysis. The AP550 supports standards-based TxBF (transmit beam-forming). The AP550 supports Bluetooth and BLE (Bluetooth Low Energy, which is Bluetooth 4.0). Although both technologies use the 2.4 GHz frequency, BLE has a lower power requirement for moving smaller amounts of data, while Bluetooth can support larger data loads.

For more information about Extreme Networks APs in general, see "Introduction to Extreme APs".

For information about connecting your AP to the network, best-practices, and troubleshooting, see "Basic Troubleshooting for New Devices".

For regulatory compliance information, see "Regulatory Compliance Statements"

Important! Change the Country Code

If your access point is configured for the World Regulatory Domain, it is important to set the country code to the country in which the AP will be deployed to meet regulatory requirements and for optimal wireless operation. To do this, follow these steps:

  • The country code selection is for World models only and is not available to FCC, CAN, and other country-specific models. Per FCC regulations, all Wi-Fi products marketed in the United States must be set to U.S. channels only.

Install the AP550

The following sections describe how to install your Extreme Networks AP550 devices, connect them to the network, and start managing them in ExtremeCloud IQ.

Hardware Components

You can see the hardware components of the AP550 in the illustration below and read about them in the sections that follow.

Hardware Component Descriptions

Hardware Specifications

The following specifications describe the physical features and hardware components, PoE electrical requirements, and the temperature and humidity ranges in which the AP550 can operate.

Regulatory Compliance Statements

The regulatory compliance statements in this section apply to Extreme NetworksAP245X devices.

 


Cloud Terms of ServiceEvaluation AgreementData Privacy and Protection

Copyright ©  Extreme Networks, Inc. 6480 Via Del Oro, San Jose CA, 95119 USA