AP510 and AP510C Hardware User Guide

Read about and view specifications and compliance information for the AP510C and AP510CX in this topic. Install the AP510C and AP510CX using this topic.

The AP510C and AP510CX are high-performance dual-5G and dual band access points.

Both are designed for indoor high-density environments that require HD video streaming and large file transfers. The AP510CX has external antennas (sold separately), and an extended temperature range for industrial environments. These devices support IEEE 802.11ax Orthogonal Frequency-Division Multiple Access (OFDMA) multi-user access.

Both access point have a Bluetooth BLE i-beacon for location based services.

For regulatory and compliance information, see "Regulatory Compliance Statements".

Safety Guidelines

Install the AP

You can mount the AP510C and AP510CX on a flat surface or wall, or on the T-rail of a standard dropped ceiling grid. There is also an accessory mounting bracket that allows you to install the device in Armstrong-style dropped ceilings (ordered separately).

The following sections describe how to install your AP510C and AP510CX devices and connect them to the network.

Hardware Components

You can see the hardware components of the AP510C and AP510CX in the illustration below and read about them in the sections that follow. The illustration shows an AP510C model. The components are the same for both models, except the AP510CX has eight external antenna connectors.

Component Descriptions

Hardware Specifications

The following sections list radio, device, power, and environmental specifications for the AP510C and AP510CX.

Regulatory Compliance Statements

The regulatory compliance statements in this section apply to Extreme Networks AP510C and AP510CX devices.

 


Cloud Terms of ServiceEvaluation AgreementData Privacy and Protection

Copyright ©  Extreme Networks, Inc. 6480 Via Del Oro, San Jose CA, 95119 USA