XR200P Router Hardware User Guide

The cautions and warnings in this section apply to XR200P routers.

The following safety icons are used in these guidelines to identify the type of precaution:

	This icon indicates a general caution. Failure to comply with a caution notification can result in damage to equipment.
	This icon indicates an electrical caution. Failure to comply with an electrical notification can result in serious injury or death, and extensive damage to equipment.
	This icon indicates a laser caution. Failure to comply with a laser caution can result in serious injury.
The following table lists the safety precautions you should follow when installing your device.
	Extreme Networks devices must be installed by a professional installer who is certified to install these types of devices and to ensure that they are properly grounded and meets applicable local and national electrical codes.
	These devices are intended for indoor use only.
	Do not install the device in an environment where the operating ambient temperature might exceed the recommended ranges.
	Electrical equipment generates heat. Ambient air temperature may not be adequate to cool equipment to acceptable operating temperatures without adequate circulation. Be sure that the room where you install your device has adequate air circulation.
	Changes or modifications made to this device that are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
	Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs when electronic components are improperly handled and can result in complete or intermittent failures. Be sure to follow ESD-prevention procedures when handling electronic components.
	Make sure the rack or cabinet (if used) housing the device is adequately secured to prevent it from becoming unstable or falling over.
	Disconnect all power by turning off the power switch and unplugging the power cord before installing or removing a device, or working near power supplies.
	Never assume that power is disconnected from a circuit; always check the circuit.
	Reliable Grounding - Reliable grounding of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips.)
	Explosion risk - There is a risk of an explosion if the lithium battery (for the CMOS clock) is replaced with an incompatible battery type. Battery replacement should be performed only by a trained electrician or technician who is able to understand all installation and device specifications.
	Lithium battery disposal - Regulations and laws pertaining to the recycling and disposal of lithium ion batteries vary from country to country as well as by state and local governments. European governments have more strict regulations on the disposal of rechargeable batteries than the USA and Canada. Check the laws and regulations where you live before disposing of lithium batteries.
	To meet federal radiation exposure requirements, these devices should be installed at a minimum distance of 9.05" (23 cm) from your body.

The status LED on the top corner of the router indicates states of activity by color (dark, amber, and white) and pattern (steady or flashing). The link status LEDs indicate port activity and speed by color (dark, green, or amber) and illumination pattern (steady or flashing). The meanings of the various color and illumination patterns are explained below.

Device Status LED

• Dark: There is no power to the device.
• Amber (steady): The device is powered on and the firmware is running normally.
• Amber (flashing): The device is performing a firmware upgrade. Do not turn the device off while the LED is flashing.
• White (steady): The device has made a CAPWAP connection to ExtremeCloud IQ and is operating properly.
• White (flashing): The device is communicating with ExtremeCloud IQ either through a wireless connection or using a backup USB modem (if one is installed). Either the wired connection is not operating properly, or the port priority 1 has been changed from WAN/Eth0 to an alternate port. By default, the WAN/Eth0 port is given first priority (1). If you WAN port is configured for port priority 1, and you want are not seeing a successful wired connection to ExtremeCloud IQ, make sure that your Ethernet cable and modem are working properly, or contact your Internet service provider.

Link Status LEDs

• Dark: There is no link.
• Green (steady): The Ethernet link is up but inactive at 1000 Mbps speeds.
• Green (flashing): The Ethernet link is up and active at 1000 Mbps speeds.
• Amber (steady): The Ethernet link is up but inactive at 10/100 Mbps speeds.
• Amber (flashing: The Ethernet link is up and active at 10/100 Mbps speeds.

PoE Status LEDs

• Dark: No power is being provided through the port.
• Green (steady): Port is delivering PoE normally to powered device.
• Amber (steady): The port is experiencing a power overload.

The AC power input connector allows you to connect the router to a 100 – 240-volt AC power source using the DC 48V (1.25A, 60W) power supply and power cord that ship with the product. Because the router does not have an on/off switch, it automatically powers on when you connect it to a power source.

The 10/100/1000-Mbps Ethernet WAN port acts as a WAN interface, is compatible with 10/100/1000Base-T/TX, and automatically negotiates half-and full-duplex connections with the connecting device. This port is auto-sensing and adjusts to straight-through and crossover Ethernet cables automatically. Use the yellow Ethernet cable that ships with the device to connect your router from the WAN port to a cable or DSL modem or other Internet device.

The XR200P router has four 10/100/1000-Mbps Ethernet RJ45 LAN ports (ETH 1 through ETH 4). These ports are compatible with 10/100/100Base-T/TX and automatically negotiate half- and full-duplex connections with the connecting device. These ports are auto-sensing and adjust to straight-through and crossover Ethernet cables automatically.

To provide Ethernet connections to devices on the LAN side, connect the ETH 1 – ETH 4 interfaces on the router to a switch or host.

Each of these ports represent a separate logical interface. For this reason, you can apply multiple LAN profiles (one for each of the four ports). In ExtremeCloud IQ, a LAN profile consists of a name, description, the ports to which it applies, and optional security and filtering rules. For information about how to configure a LAN profile, refer to ExtremeCloud IQ Help

The pin assignments in the Ethernet ports follow the TIA/EIA-568-B standard. The ports accept standard Cat3, Cat5, or Cat6 Ethernet cable. Because the ports have autosensing capabilities, the wiring termination in the Ethernet cable can be either straight-through or crossover.

• For PoE ports, especially with 803.2at, Extreme Networks recommends using Cat5 or Cat6 Ethernet cable.

PoE Ports

On XR200P routers, the ETH1/PoE and ETH2/PoE ports can provide to powered devices such as VoIP phones, wireless access points, and network cameras. These ports are IEEE802.3af and IEEE802.3at PSE (power sourcing equipment) compliant, as described here:

• 802.3af PoE provides up to 12.95 W of DC power to each device (this rate reflects normal power loss through the cables). 802.3af meets the power demands of PoE Class 0, 1, 2, and 3 devices.
• 802.3at PoE provides up to 25.5 W of DC power to each device (this rate reflects normal power loss through the cables). 802.3at meets the power demands of PoE Class 4 devices.

The XR200P router balances PoE power output automatically. For example, if a device connected to ETH1 requires more power than the port can provide, and if ETH1 has the higher priority, ETH2 shuts down and shifts all remaining power to ETH1. The router generates a log for every shutdown event.

• The XR200P router must be connected to an AC power source. It provides power to devices connected to one of its Eth1/PoE and Eth2/PoE LAN ports. Currently, problems can arise if the router is connected to a switch port that is enabled to provide PoE. When the router ports are plugged in to a PSE source, be sure to disable the PSE power source before plugging the cables into the router ports.

Use the RJ45 Console port to make a serial connection between your management system and the router. The management station from which you connect to the device must have a VT100 emulation program, such as Tera Term Pro^© (a free terminal emulator) or Hilgraeve Hyperterminal^® (provided with Windows^® operating systems from Windows 95 to Windows XP). The serial connection settings are: 9600 bits per second, 8 data bits, no parity, 1 stop bit, and no flow control. For Console port pin assignments, see "Extreme Device Pin Assignments".

To reset the device or restore factory setting, insert a paper clip or similar tool into the pinhole and press the Reset button. To reboot the device, hold the button down between 1 and 5 seconds. To return the configuration to the default settings, hold the button down for at least 5 seconds. When you release the button, the status LED goes dark as the system reboots, then turns amber while the firmware loads and the system performs a self-test. After the firmware has finished loading and the router has connected to ExtremeCloud IQ, the device status LED glows steady white.

XR200P devices can use a wireless USB modem for a WAN connection. The typical use of the USB modem is to act as a backup to the ETH0/WAN interface; however, for locations where an Ethernet connection to the WAN is not possible, you can use the USB modem as the primary (and only) interface to the WAN.

• When using a wireless USB modem on a XR200P device you must connect it to an AC power source instead of using PoE to power the device.

Extreme Networks currently supports the following modems:

• AT&T Momentum Sierra Wireless Aircard 313U
• AT&T Shockwave Sierra Wireless 308U, 310U, 312U, 319U, 320U, 326U
• Verizon Pantech UML290
• Huawei E1752
• Huawei UMG366
• Skyus DS
• Verizon Novatel USB 551L
• Verizon U620L

Before you can use a modem with an Extreme Networks device, you must first have the modem activated. You can have this done in the store where you purchased the modem, or you can install software such as the Verizon VZA Access Manager on your computer, connect the modem to the USB port on your computer, preferably at the site where you plan to deploy the router to confirm that the modem is working properly and that there is adequate wireless network coverage in your location.

You can physically secure the router by attaching a lock and cable (such as a Kensington^® notebook lock). Wrap the cable around an immovable object like a table or desk, and then insert the lock into the built-in security slot in the device.

• Chassis dimensions: 7.75” W x 1.13" H x 6.1” D (19.7 cm W x 2.87 cm H x 15.57 cm D)

• Chassis weight: 14 oz (400 g)

• Two embedded single-band omnidirectional 802.11b/g/n antennas

• One IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-TX), and IEEE 802.3ab (1000BASE-T) compliant 10/100/1000 Mbps RJ45 Fast Ethernet WAN port
• Four IEEE 802.3, 802.3u, and 802.3ab compliant 10/100/1000 Mbps RJ45 Ethernet LAN ports with autosensing and auto-MDI/MDI-X. IEEE 802.3x PAUSE frame flow control in full duplex. Ports 1 and 2 provide 15.4W of PoE power.

• One Type-A USB 2.0 port with backward compatibility with USB1.1.

• AC power adapter:

• DC power supply: 48V/1.25A, 60 W

• PoE:

• Operating temperature: 32°F to 104°F (-0 to 40°C)
• Storage temperature: -4°F to 158°F (-40 to 70°C)
• Operating humidity: 10% to 90% (noncondensing)
• Storage humidity: 5% to 95% (noncondensing)
• RoHS compliant

• For Japan, the XR200P is restricted for indoor use in the 5150-5350 MHz band only.

EU Declaration of Conformity

View this information online at www.aerohive.com/support/regulatory-compliance

Extreme Networks, Inc. declares that this device complies with the essential requirements of the Radio Eqiupment Directive 2014/53/EC.

• Bulgarian [български]: [Extreme Networks] С настоящото [Extreme Networks] декларира, че този тип радиосъоръжение [XR200P] е в съответствие с Директива 2014/53/ЕС.
• Croatian [hrvatski]: [Extreme Networks] ovime izjavljuje da je radijska oprema tipa [XR200P] u skladu s Direktivom 2014/53/EU. 
• Czech [Česky]: [Extreme Networks] Tímto [jméno výrobce] prohlašuje, že typ rádiového zařízení [XR200P] je v souladu se směrnicí 2014/53/EU.
• Danish [Dansk]: Hermed erklærer [Extreme Networks], at radioudstyrstypen [XR200P] er i overensstemmelse med direktiv 2014/53/EU.
• Dutch [Nederland]Hierbij verklaar ik, [Extreme Networks], dat het type radioapparatuur [XR200P] conform is met Richtlijn 2014/53/EU.
• English: Hereby, [Extreme Networks], declares that this [ XR200P] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC.
• Estonian [Eesti]: Käesolevaga deklareerib [Extreme Networks], et käesolev raadioseadme tüüp [XR200P] vastab direktiivi 2014/53/EL nõuetele.
• Finnish [Suomi]: [Extreme Networks] vakuuttaa, että radiolaitetyyppi [XR200P] on direktiivin 2014/53/EU mukainen..
• French [Français]: Le soussigné, [Extreme Networks], déclare que l'équipement radioélectrique du type [XR200P] est conforme à la directive 2014/53/UE.
• German [Deutsch]: Hiermit erklärt [Extreme Networks], dass der Funkanlagentyp [XR200P] der Richtlinie 2014/53/EU entspricht.
• Greek [Ελληνική]: ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ [Extreme Networks] ΔΗΛΩΝΕΙ ΟΤΙ [ XR200P] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 2014/53/EC.
• Hungarian [Magyar]: [Extreme Networks] igazolja, hogy a [XR200P] típusú rádióberendezés megfelel a 2014/53/EU irányelvnek.

• Italian [Italiano]: Il fabbricante, [Extreme Networks], dichiara che il tipo di apparecchiatura radio [XR200P] è conforme alla direttiva 2014/53/UE.
• Latvian [Latviski]: Ar šo [Extreme Networkss] deklarē, ka radioiekārta [XR200P] atbilst Direktīvai 2014/53/ES.
• Lithuanian [Lietuvių]: Aš, [Extreme Networks], patvirtinu, kad radijo įrenginių tipas [XR200Ps] atitinka Direktyvą 2014/53/ES.
• Maltese [Malti]: B'dan, [Extreme Networks], niddikjara li dan it-tip ta' tagħmir tar-radju [XR200P] huwa konformi mad-Direttiva 2014/53/UE.
• Polish [Polski]: [Extreme Networks] niniejszym oświadcza, że typ urządzenia radiowego [XR200P] jest zgodny z dyrektywą 2014/53/UE.
• Portuguese [Português]: O(a) abaixo assinado(a) [Extreme Networks] declara que o presente tipo de equipamento de rádio [XR200P] está em conformidade com a Diretiva 2014/53/UE.
• Romanian [Romania]: Prin prezenta, [Extreme Networks] declară că tipul de echipamente radio [XR200P] este în conformitate cu Directiva 2014/53/UE.
• Slovak [Slovensky]: [Extreme Networks] týmto vyhlasuje, že rádiové zariadenie typu [XR200P] je v súlade so smernicou 2014/53/EÚ.
• Slovenian [Slovenija]: [Extreme Networks] potrjuje, da je tip radijske opreme [XR200P] skladen z Direktivo 2014/53/EU.
• Spanish [Español]: Por la presente, [Extreme Networks] declara que el tipo de equipo radioeléctrico [XR200P] es conforme con la Directiva 2014/53/UE.
• Swedish [Sverige]: Härmed försäkrar [Extreme Networks] att denna typ av radioutrustning [XR200P] överensstämmer med direktiv 2014/53/EU.

This product supports the following radio frequencies and power levels in the EU version:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Bulgarian [български]: Този продукт поддържа следните радиочестоти и нива на мощност във версията на ЕС:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Croatian [hrvatski]: Ovaj proizvod podržava sljedeće radijske frekvencije i razinu snage u verziji EU:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Česky [Czech]: [Tento produkt podporuje následující rádiové frekvence a úrovně výkonu ve verzi EU:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Danish [Dansk]: Dette produkt understøtter følgende radiofrekvenser og strømniveauer i EU-versionen:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Dutch [Nederland]: Dit product ondersteunt de volgende radiofrequenties en vermogensniveaus in de EU-versie:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

English: This product supports the following radio frequencies and power levels in the EU version:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Estonian [Eesti]: See toode toetab järgmisi raadiosagedusi ja võimsuse taseme ELis versioon:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Finnish [Suomi]: Tämä tuote tukee seuraavia radiotaajuuksia ja tehoja EU-versiossa:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

French [Français]: Ce produit prend en charge les fréquences radio et les niveaux de puissance suivants dans la version EU:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

German [Deutsch]: Dieses Produkt unterstützt die folgenden Funkfrequenzen und Leistungsstufen in der EU-Version:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Greek [Ελληνική] Αυτό το προϊόν υποστηρίζει τις ακόλουθες ραδιοσυχνότητες και επίπεδα ισχύος στην έκδοση της ΕΕ:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Hungarian [Magyar]: Ez a termék a következő rádiófrekvenciákat és teljesítményszinteket támogatja az EU verziójában :

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Italian [Italiano]: Questo prodotto supporta le seguenti frequenze radio e livelli di potenza nella versione UE:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Latvian [Latviski]: Šis produkts atbalsta šādus radio frekvences un jaudas līmeni ES versiju:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Lithuanian [Lietuvių]: Šis produktas palaiko šiuos radijo dažnius ir galios lygį ES versija:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Maltese [Malti]: Dan il-prodott jappoġġja l-frekwenzi tar-radju li ġejjin u l-livelli ta 'enerġija fil-verżjoni UE:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Pollish [Polski]: Ten produkt obsługuje następujące częstotliwości radiowe i poziomy mocy w wersji unijnej:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Portuguese [Português]: Este produto suporta as seguintes frequências de rádio e níveis de potência na versão UE:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Romanian [Romania]: This product supports the following radio frequencies and power levels in the EU version

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Slovak [Slovensky]:Tento produkt podporuje nasledujúce rádiové frekvencie a úrovne napájania vo verzii EÚ:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Slovenian [Slovenija]: Ta izdelek podpira te radijske frekvence in ravni moči v različici EU:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Spanish [Español]: Este producto admite las siguientes frecuencias de radio y niveles de potencia en la versión de la UE:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

Swedish [Sverige]: Denna produkt stöder följande radiofrekvenser och effektnivåer i EU-versionen:

• 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz eirp<20 dBm
• 802.11 a/ac/n: 5 GHz band: 5150-5350 MHz eirp<23 dBm, 5500-5720 MHz eirp<30 dBm
• BLE: 2402-2480 MHz eirp<10 dBm

To meet radiation exposure requirements, these devices should be installed at a minimum distance of 9.05" (23 cm) from people or animals.

Restrictions: 5150-5250 MHz for indoor use only.

Bulgarian [български]: За да отговарят на изискванията за излагане на радиация, тези устройства трябва да бъдат инсталирани на минимално разстояние от 23 см от хората или животните.

Ограничения: 5150-5250 MHz само за вътрешна употреба.

Croatian [hrvatski]: Da bi zadovoljili zahtjeve izloženosti zračenju, ti uređaji trebaju biti instalirani na minimalnoj udaljenosti od 23 cm od ljudi ili životinja.

Ograničenja: 5150-5250 MHz samo za unutarnju uporabu.

Czech [Česky]: Aby byly splněny požadavky na ozáření, měly by být tato zařízení instalována v minimální vzdálenosti 23 cm od lidí nebo zvířat.

Omezení: 5150-5250 MHz pouze pro vnitřní použití.

Danish [Dansk]: For at opfylde kravene til strålingseksponering skal disse enheder installeres i mindst 9.05" (23 cm) afstand fra mennesker eller dyr.

Restriktioner: 5150-5250 MHz kun til indendørs brug.

Dutch [Nederland]: Om aan stralingsblootstelling te voldoen, dienen deze apparaten op een minimumafstand van 9.05" (23 cm) van mensen of dieren te worden geïnstalleerd.

Beperkingen: 5150-5250 MHz alleen voor gebruik binnenshuis.

English: To meet radiation exposure requirements, these devices should be installed at a minimum distance of 9.05" (23 cm) from people or animals.

Restrictions: 5150-5250 MHz for indoor use only.

Estonian [Eesti]: Et rahuldada kiirituse nõuetele, need seadmed tuleb paigaldada minimaalselt 9.05 "(23 cm) inimestelt või loomadelt.

Piirangud: 5150-5250 MHz sisetingimustele.

Finnish [Suomi]: Säteilytysvaatimusten täyttämiseksi nämä laitteet on asennettava vähintään 9.05" (23 cm) etäisyydelle ihmisistä tai eläimistä.

Rajoitukset: 5150-5250 MHz vain sisäkäyttöön.

French [Français]: Pour répondre aux exigences d'exposition aux rayonnements, ces appareils devraient être installés à une distance minimale de 9.05" (23 cm) des personnes ou des animaux.

Restrictions: 5150-5250 MHz pour usage intérieur seulement.

German [Deutsch]: Um die Anforderungen an die Strahlenbelastung zu erfüllen, sollten diese Geräte in einem Abstand von 9.05" (23 cm) von Personen oder Tieren installiert werden.

Einschränkungen: 5150-5250 MHz nur für den Innenbereich.

Greek [Ελληνική]: Για την κάλυψη των απαιτήσεων έκθεσης σε ακτινοβολία, οι συσκευές αυτές πρέπει να τοποθετούνται σε απόσταση τουλάχιστον 23 cm από ανθρώπους ή ζώα.

Περιορισμοί: 5150-5250 MHz μόνο για εσωτερική χρήση.

Hungarian [Magyar]: A sugárterhelési követelmények teljesítése érdekében ezeket az eszközöket legalább 9.05" (23 cm) távolságra kell felszerelni az emberek vagy az állatoktól.

Korlátozások: 5150-5250 MHz csak beltéri használatra.

Italian [Italiano]: Per soddisfare i requisiti di esposizione alle radiazioni, questi dispositivi devono essere installati ad una distanza minima di 23 cm da persone o animali.

Restrizioni: 5150-5250 MHz solo per uso interno.

Latvian [Latviski]: Lai apmierinātu starojuma iedarbības prasībām, šīs ierīces ir uzstādītas pie minimālo attālumu 9.05" (23 cm) no cilvēkiem vai dzīvniekiem.

Ierobežojumi: 5150-5250 MHz izmantot tikai telpās.

Lithuanian [Lietuvių]: Siekiant patenkinti SPINDULIAVIMĄ reikalavimus, šie įtaisai turi būti įrengiami ne arčiau kaip 9.05" (23 cm) nuo žmonių ar gyvūnų.

Apribojimai: 5150-5250 MHz naudoti tik patalpose.

Maltese [Malti]: Biex jilħqu l-ħtiġiet ta 'espożizzjoni tar-radjazzjoni, dawn il-mezzi għandhom jiġu installati f'distanza minima ta' 12.6" (32 ċm) minn nies jew annimali.

Restrizzjonijiet: MHz 5150-5250 għall-użu fuq ġewwa biss.

Polish [Polski]: Aby spełnić wymagania dotyczące narażenia na promieniowanie, urządzenia te powinny być instalowane w odległości minimum 9.05" (23 cm) od ludzi lub zwierząt.

Ograniczenia: 5150-5250 MHz tylko do użytku wewnętrznego.

Portuguese [Português]: Para atender aos requisitos de exposição à radiação, esses dispositivos devem ser instalados a uma distância mínima de 23 cm (9.05") de pessoas ou animais.

Restrições: 5150-5250 MHz para uso interno apenas.

Romanian [Romania]: Pentru a îndeplini cerințele de expunere la radiații, aceste dispozitive ar trebui instalate la o distanță minimă de 23 cm de la oameni sau animale.

Restricții: 5150-5250 MHz numai pentru uz intern.

Slovak [Slovensky]: Ak chcete splniť požiadavky na vystavenie žiareniu, mali by byť tieto zariadenia inštalované v minimálnej vzdialenosti od ľudí alebo zvierat od minimálnej vzdialenosti 23 cm.

Obmedzenia: 5150-5250 MHz iba pre vnútorné použitie.

Slovenian [Slovenija]: Da bi zadovoljili zahteve izpostavljenosti sevanja, morajo biti te naprave nameščene na razdalji najmanj 9.05" (23 cm) iz ljudi ali živali.

Omejitve: 5150-5250 MHz samo za uporabo v zaprtih prostorih.

Spanish [Español]: Para cumplir con los requisitos de exposición a la radiación, estos dispositivos deben instalarse a una distancia mínima de 9.05" (23 cm) de personas o animales.

Restricciones: 5150-5250 MHz sólo para uso en interiores.

Swedish [Sverige]: För att uppfylla kraven på strålningsexponering bör dessa enheter installeras på minst 9.05" (23 cm) från människor eller djur.

Restriktioner: 5150-5250 MHz endast för inomhusbruk.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the antenna of the receiving devices.
• Increase the separation between this equipment and receiving equipment.
• Connect this equipment into an outlet on a circuit different from that to which the receiving equipment is connected.
• Consult the dealer or an experienced radio or TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 9.05" (23 cm) between the radiator and people or animals.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Country Code selection feature to be disabled for products marketed to the US/CANADA.

This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions:

• This device may not cause interference, and
• This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

• l'appareil ne doit pas produire de brouillage, et
• l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Caution:

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

Avertissement:

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 23 cm between the radiator and people or animals.

Déclaration d'exposition aux radiations:

Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 23 cm de distance entre la source de rayonnement et des personnes ou des animaux.

Extreme XR200P

第十二條→經型式認證合格之低功率射頻電機，非經許可，公司，商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。

第十四條→低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。

前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

 

在 5.25-5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。

無線資訊傳設備的製造廠商應確保頻率穩定性，如依製造廠商使用手冊上所述正常操作，發射的信號應維持於操作頻帶中。

Taiwan MPE Warning

電磁波曝露量MPE標準值(MPE) 1mW/cm²，送測產品實值為0.734 mW/cm²